The simplest way to track EICR renewals across a portfolio is one shared record listing every property, its last inspection date and its due date, reviewed monthly. An EICR is valid for a maximum of five years, or a shorter period if the inspector says so on the report, and that second part is what catches landlords out.
Why does tracking get harder with more properties?
Because the dates almost never line up. Properties join a portfolio at different times, and each certificate runs its own clock from its own inspection date. Without a single place recording all of them, one can quietly lapse while you are busy with the others.
It is also not always a flat five years. Under the Electrical Safety Standards in the Private Rented Sector (England) Regulations 2020, installations must be inspected at intervals of no more than five years. If the inspector recommends a shorter interval on the report, for example because the installation is old or in poor condition, that earlier date is the one that counts. Your tracker needs to record the due date from the report, not just “inspection date plus five years”.
What is the simplest system that actually works?
A spreadsheet is enough. For each property, record:
- The address and tenancy start date
- The date of the last EICR and who carried it out
- The next due date, taken from the report
- The overall result (satisfactory or unsatisfactory) and any outstanding remedial work
- The date you gave a copy to the tenant
Then check it on a set day each month. Anything due in the next six months should get a booking, not just a note. Booking early matters because an unsatisfactory result gives you 28 days, or a shorter period if the report specifies one, to complete remedial work, so you do not want to start with a week to spare.
Should every property renew on the same schedule?
Not necessarily. Forcing everything onto one date means a large one-off cost and a scheduling squeeze every five years. Staggered dates spread the cost and the electrician’s time across the year, and one unsatisfactory result does not land alongside nine others at once.
If you do want to bring dates together, do it by bringing a property’s inspection forward, never by stretching it. An inspection done early is fine. One done late is a breach.
What happens if a certificate lapses without you noticing?
You are non-compliant with the Regulations from the day the report expires, whether or not you noticed. The local authority can serve a remedial notice and, where a landlord is in breach, issue a financial penalty of up to £30,000 per breach. An expired report is also a much weaker position to be in if anything goes wrong at the property, or if a lender, insurer or tenant asks to see it.
Frequently asked questions
Do I need a new EICR when a tenant changes?
Not if the current report is still in date. You must give the new tenant a copy before they move in, and keep a copy to hand for the next inspector and for the local authority if they ask.
Can I inspect a property earlier than it is due?
Yes. A new EICR simply starts a fresh cycle from its own date, which is a useful way to bring a portfolio into a more manageable pattern.
What if a report comes back unsatisfactory?
Unsatisfactory means at least one C1, C2 or FI observation. Remedial work must be done within 28 days, or sooner if the report says so, and you must confirm in writing to the tenant and the local authority that it is complete. C3 observations are recommendations and do not make a report unsatisfactory on their own.
How we help portfolio landlords stay ahead of it
Booking every property with one provider means one point of contact holding the history, rather than piecing it together from several past contractors. We can work through a portfolio on a staggered schedule that suits you, booking each property in good time before its own due date.
See our landlord EICR service, or read how to tell if a single property’s EICR is due if you are starting from scratch. Book online to get your portfolio on one schedule.